Sewing Machines

To obtain the best results when using a Janome HD3000 or any other sewing machines, you must understand how to properly adjust your unit, including the pressure. Machine pressure relates to the amount of pressure on the presser foot. This is a critical adjustment that must be correct to prevent stitching difficulties that can affect an entire project.

To ensure correct pressure when you sew with Janome sewing machines, you must understand why pressure matters and how it should be properly adjusted.

Pressure and the Presser Foot

The presser foot on sewing machines is designed to work in conjunction with the feed dogs to continuously push the fabric under the needle at the right speed to produce the correct stitching. To efficiently do this, the presser foot must provide just enough pressure to keep the fabric steady while allowing the feed dog to push it forward after the needle is raised.

For best results, you should adjust the pressure to accommodate different types and weights of fabric so the feed dogs can work smoothly.  

Problems with Pressure

You may experience a few problems when the pressure on your Janome sewing machine is not properly adjusted. If presser foot pressure is too low, the fabric may slide around under the foot. When the pressure is too high, the feed dog cannot freely move the fabric forward. The fabric may bunch when stitches are made too close together. When fabric is advanced unevenly by feed dogs, this may be an indication that the pressure needs to be readjusted.

Adjusting Presser Foot Pressure

To remedy the issues mentioned above, you need to make some adjustments to the presser foot pressure. This is done using the pressure adjustment knob or dial. It is usually located either on top of the machine or on the right side, as with the Janome HD3000. Based on the symptom, you should increase or decrease the pressure until the fabric feeds correctly. Finer and lighter weight fabrics may require a slight increase in pressure, while thicker and heavier fabrics typically demand a slight reduction in pressure.

Occasionally, fabric feed issues may have other causes; however, it is best for you to adjust pressure first. If issues like uneven feeding of multiple layers of fabric persist, a walking presser foot may be required to even out the stitching. Walking feet are designed to feed numerous layers at the same time. This reduces shifting to ensure layers are properly stitched. When working with vinyl or other materials that may stick or bind to the presser foot, a slippery Teflon foot will usually remedy the problem.

Proper presser foot adjustment is essential for achieving the best results with all sewing machines. Although most machines are initially set to a universal pressure that works with most fabric, you must recognize when pressure adjustments on Janome sewing machines like the Janome HD3000 are required. Many stitching and seaming problems can be avoided by paying close attention to this important detail and always working with the right pressure!

Janome HD3000 Sewing Machine with Exclusive Bonus Bundle

Janome Sewing Machines

Janome HD3000 Refurbished Sewing Machine

Janome Sewing Machines